Perfectly Compatible with GQ and Gpro Series

This laser engraver enclosure is specifically designed for the Monport GQ and Gpro series marking fiber machine to minimize unintended damage caused by the laser.Especially, the bottom of the protective cover is designed with dual slot aviation aluminum profiles, which can be perfectly inserted into the bottom plate of the marking machine.

Interlocking Door with Auto-shutdown

A pair of Omron magnetic induction switches have been added at the position of the door and door frame. During the carving process, as long as the door is opened, the carving will immediately stop, greatly increasing safety (Attention: To use this door opening protection function, please ensure that your marking machine has a protective cover interface on the back).

Good Sealing and Equipped with Air Vent

The back of the protective cover is equipped with a flexible accordion cover that can move up and down with the light path. At the same time, there is a ventilation opening on the back that can be used with a Monport air purifier (recommended 150w or 220w fume extractor).

Easy to Use

After the installation of the whole device, the threaded rotating rod is placed on the outside of the machine, which solves the problem of inconvenient height adjustment before, makes the rotating handle easier to operate, and facilitates focal length adjustment.

Easy to Install

This protective cover is pre installed by 70% and can be installed by one person in ten minutes (Monport provides video installation tutorial).