Skip to content
Buy Bundle & Save More!
Fast Free Shipping from US

Monport 80W Built-in Chiller CO2 Laser Engraver & Cutter (36" x 24")

$4,999.99
$4,999.99 - $4,999.99
Current price $4,999.99
Original price $4,999.99 - Original price $4,999.99
Original price
Free Shipping

Free express shipping from US

2-Year Warranty

US Free Shipping&Tax included.

Dimension & Specifications

Machine Dimension: 57'' x 43'' x 35''( 145cm x 110cm x 90cm )

Package Dimension: 61” x 47” x 47” ( 156 cm x 120 cm x 119 cm )

Working Dimension: 24'' x 36'' ( 61 cm x 91.5 cm ) 

Pass-through Dimension: 2.9'' x 37.4''( 7.5cm x 95 cm )

Max Engraving Speed: 600mm/s

Max Engraving Depth: 19.05mm

Min Engraving Depth: 0.01mm

Focal Lens Diameter: 18mm

Mirror Diameter: 25mm

7” Standard Z-depth and 8” Max Z-depth

Package Weight: 568.8 lbs ( 258 kg )

Monport 80W Benefits

Fireproof Viewing Window

This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials.

Built-in Smart Water Chiller 

The built-in 3L water chiller is easy to operate and cools down the temperature without any other machines. To meet different needs, there are two cooling modes, constant and intelligent temperature modes. This professional water chiller has multiple warning protection mechanisms such as an alarm for ambient temperature, an alarm for overheated/overchilled water temperature, and so on. When the alarm occurs, the display will alternate between the water temperature and the error.

Enclosed Aeronautical Aluminum Rail

Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units.

Laser Protective Glasses for Free

Lasers emit radiation in the invisible form of light. This pair of laser protective glasses is certified to protect your eyes against radiation damage by looking at the class 4 laser in any way (directly, indirectly, or even looking at the laser dot on a surface can damage your eyes).  

Ruida Digital Controller

Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can  control the laser head, start or stop projects, adjust laser power and speed settings and so on.

80W CO2 Engraver Features

High Speed and Resolution 

The Engraving Speed is up to 600 mm/s;
The Resolution is up to 4500 dpi;
3 LED light strips above the work bed provide illumination for precision;
2.0" Focal distance provides high resolution and etching of tiny fonts 

Autofocus

Use the control panel to correct the focus automatically at the touch of a button — no more manual testing and adjustment.

Built-in Air Assist

A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise.

3-ways to Connect with PC End

Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection.

Red Dot Guidance

The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance.

Automatic Safety Sensor

The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the “Enter” button to continue operation.

80W CO2 Engraver Specification

Software

Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit

MacOS (Version 10.11 and higher) ONLY with LightBurn software

Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD

Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others

Laser System

Laser Wavelength 10640 nm;

Rated at over 80 watt;

Mechanics

Linear System— Enclosed aeronautical aluminum rails

Motion— Equipped with stepper X, Y, Z axis, plus mechanical limit switches

Cooling— Built-in 4L water chiller with two operating modes

Air Assist— Built-in air assist with no external compressor required

Ventilation— On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors 

Standard 110V, AC power connection

4-pin port connection for rotary axis devices

Temperature

Recommended Operating Temperature: 60-104 °F (16C-40C)

Attention: the CO2 water temperature must be maintained at60-70°F (16-21°C)

Laser Tube Lifetime

80W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance

PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:

Low Power 10–40% = 7,000–8,000 Hours

Moderate Power 40–70% = 5,000–6,500 Hours

High Power 70–100% = 3,000–4,000 Hours

Material Capability

Can safely engrave or cut any laser-compatible material

Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber        

 Contact us with questions on specific materials not listed. If necessary, we can test it for you

Package Contents

Laser Engraver Machine *1

A Pair of Laser Protective Glasses *1

Accessory Bag *1

Ethernet to Ethernet Cable *1

USB Type-A to Type-A Cable *1

Venting Exhaust Duct *1

USB Drive with Software (RDworks) *1

Hex Wrenches *10

Double-sided Tape *1

Power Cord *2

Keys *2

Silicone Sealant *1

Stainless Steel Clamp *1

Instruction Manual *1

Warranty & Certifications

2-year warranty on all 80W laser machines and parts

1-year warranty on laser tube

FDA Approved & CE Certified

About More

Download the software RDworks

Download the Manual: 80W CO2 User Manual

Download the Built-in Chiller Manual: Built-in Chiller User Manual

Download the Settings: CO2 Parameter Settings

We offer compatible Rotary Axis and Water Chiller!

We sponsor CDR files: https://kokorosastudio.com

FEATURES
Monport 80w Features
Enclosed Aeronautical Aluminum Rail & Autofocus
The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units. Use the control panel to correct the focus automatically at the touch of a button — no more manual testing and adjustment.
Aluminum Rail
Autofocus
Built-in Smart Water Chiller
The built-in 3L water chiller is easy to operate and cools down the temperature without any other machines. More space-saving and convenient
Smart Water Chiller
High Speed and Resolution
The Engraving Speed is up to 600 mm/s. The Resolution is up to 4500 dpi;
Speed: 600mm/s
Compatible with Lightburn, RDWorks.
Wide Application
Easy to Use
Excellent Cutting and Engraving Capabilities
Monport 80W CO2 Laser can cut different of wood, acrylic, stone and etc.
Various Materials
DETAILED PARAMETERS
Compare Each Built-in CO2 Laser Model
Manchine Model Monport 80W Built-in Chiller Monport 100W Built-in Chiller Monport 130W Built-in Chiller Monport 150W Built-in Chiller
Working Area 24"x 36" 24" x 40" 55" x 35" 64" x 40"
Max. Marking Speed  600mm/s  600mm/s  600mm/s  600mm/s
Machine Dimension 57"x 43" x 35" 61"x 43" x 35" 72.8" x 55" x 35" 84.6" x 59" x 35"
Pass-through Dimension 2.9"x 37.4" 2.9" x 43" 2.9" x 54.9" 2.9" x 66.7"
Wheels Height 3.9" 3.9" 3.9" 3.9"
Output Power 80W 100W 130W 150W
Cooling method Built-in Chiller Built-in Chiller Built-in Chiller Built-in Chiller
Provided Operating Software RDworks RDworks RDworks RDworks
Laser Wavelength 10640nm 10640nm 10640nm 10640nm
Expected Service Life 12,000hr 12,000hr 12,000hr 12,000hr
Product Weight 568.8 lbs 639.3 lbs 873 lbs 1036 lbs
Supported image formats BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others
Compatible Software Lightburn, RDWorks, Coreldraw, Auto-CAD Lightburn, RDWorks, Coreldraw, Auto-CAD Lightburn, RDWorks, Coreldraw, Auto-CAD Lightburn, RDWorks, Coreldraw, Auto-CAD
  • Click the download button, you can get all machine parameters.
  • PDF

More Readings

  • What Materials cannot be Cut by Laser Machine?
    September 2, 2022

    What Materials cannot be Cut by Laser Machine?

    Wood, paper, cork, and some plastics and other materials can be cut with a laser engraving machine. It can also be laser engraved on wood, cardboard, aluminum, stainless steel, plastic, marble, stone, ceramic tile, and glass. Some materials, however, should...

    Read now
  • 10 Common Problems & Solutions
    December 22, 2021

    10 Common Problems & Solutions

    Before leaving the factory, all Monport laser engraving machine have been undergone strict quality inspections, there are no need to worry about quality problems. But if the following problems occur due to improper operation, you can refer to the following common solutions.  Ⅰ....

    Read now

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
<