A Comprehensive Laser Marking Operation Guide for Beginners

Have you just received a brand new laser marking machine and are confused about how to operate it properly? Don't worry! This guide covers every step of the process, from start-up preparation to the end of operation, to ensure that you are able to use this laser marking machine safely and efficiently. This article will provide you with practical guidance on how to operate your laser marking machine with confidence.

Here is a video about Setup and Test of a new Monport GA Mopa Fiber Laser, you can also learn more in the video:

Preparation Before Powering On

• Clean the Workbench:Ensure a clean work environment to minimize foreign objects affecting marking quality.
• Check Grounding:Ensure operator safety and prevent equipment damage from static electricity.
• Remove Laser Mirror Protective Cover:Prepare the laser for operation.

Starting Up the Equipment

• Activate Exhaust System:Ensure proper air circulation in the operating area to promptly remove harmful gases.
• Power On:Confirm all equipment components receive power, with indicator lights and fans functioning properly.
• Start Control System:Power on the display monitor and industrial computer, prepare operating software.

Marking Preparation

• Load Software and Files:Open EzCad2.0 software, navigate to File → Open → Select the file to mark (file extension .ezd).
• Install Workpiece:Place the workpiece fixture directly under the laser head on the table.
• Focus:Adjust the height of the gantry arm using automatic focus or manual knob until the three-point red laser converges into one point on the workpiece, optimizing laser focus.
• Red Light Preview:After adjusting focus, click "Red Light Preview" to display a red box. Move the fixture to align the box over the intended marking area. Once aligned, click "Red Light Preview" again to turn it off and secure the fixture.

Marking Operation

• Test Engrave and Adjust Parameters:Test mark using scrap material to adjust parameters multiple times until achieving optimal results.
• Begin Marking:After confirming settings, press F2 or click "Start" to begin marking the workpiece. (For marking multiple workpieces, repeat this step.)

Ending Operations

• Save Settings:Record graphics and parameters for future reference.
• Cleanup and Shutdown:Close software, computer, and power sources. Clean workbench and cover the laser mirror with protective covers.

Notes

• Focus Accuracy:Precisely adjust to reduce energy consumption and extend laser life.
• Workpiece Positioning:Ensure consistent positioning to avoid marking deviations.
• Surface Cleanliness:Maintain clean workpiece surfaces for clearer marking.

Safety Requirements

• Personal Protective Equipment:Wear protective glasses to avoid direct laser exposure to the eyes.
• Body Clearance:Keep body parts away from the laser path during operation.
• Exhaust System:Use smoke purifiers to timely remove harmful gases.
• Environmental Safety:Keep away from flammable and explosive materials to prevent fire hazards.
• Emergency Response:Know the location of emergency stop switches and immediately stop and notify technical personnel in case of emergencies.

This laser marking operation tutorial not only standardizes operational steps but also emphasizes safety awareness and environmental protection, serving as a crucial guide for laser marking operations. Strict adherence to these guidelines ensures both safety and efficiency in production.

Contact us

Our customer service team will respond within 24 hours. If you have any questions, please contact us by email：

Monport Laser Customer Support Email: support@monportlaser.com.

Amazon/eBay Customer Support Email: support@monportlaser.com.