Experience Level: Beginner Friendly
Attention: This is a file for you to download. It can be imported to the supported software to do the laser project - No concrete product will be shipped. And you can only use it personally!
How to get the file:
Once the payment is confirmed and processed, the vector file you have purchased will be sent to you via our customer service email. Returns, exchanges, or cancellations are not accepted. But please feel free to contact us if you have any questions on the file or the order.
Wood Material (in linked video and pictured: used a wooden pumpkin cutout from the dollar store).
A 7.5”x6” space was utilized.
If using the provided .svg file, you can resize the design as needed. You can also import it into many different programs.
If using the provided LightBurn file, you will need to have the LightBurn Program License.
Acrylic Paint - if you want to add color to the pumpkin, paint it and then let it dry for a couple hours (more depending on how much paint you used). You could also use wood stain instead before or after engraving it, depending on the look you’re going for.
Estimated Engraving Time: 35 minutes
CO2 40W Settings: Speed 5700/Power 27.5%
*Please note that settings may vary.
TIP: After engraving, don’t move your project until you check to see if you are happy with the results. If the engraving is not deep and clean enough, you can run another pass.
Link to project video: https://youtu.be/MfvaJoQzqQ8?si=U9cos8kmdijmDPCj