Skip to content

🔥 All CO2 Laser Engraver Sent FREE Laser Marking Spray!

Monport 1.0 Control board vs Monport 2.0 Control Board

10%
off
Hurry! Offer Ends Soon!
CODE: BESTMP10
COPY
CODE
50%
off
Laser Marking Spray | Offer Ends Soon!
CODE: VIP50
COPY
CODE

Are you looking for the perfect control board for your K40 laser engraver? Look no further! In this comprehensive blog post, we will dive deep into the world of laser control boards, black laser marking spray and their impact on engraving quality. comparing the Monport Nano Laser Control Board and the Monport GRBL Control Board. Our goal is to help you make an informed decision to optimize your laser engraving and cutting experience.

 

Special Offer | Monport 40W Pro Lightburn-Supported (12" X 8") CO2 Laser Engraver & Cutter with Air Assist - 40W Pro


Section 1: Nano Control Board vs GRBL Control Board - Unraveling the Mystery

Nano Control Board

The Nano Control Board, in the context of the K40 CO2 laser engraver, typically refers to the M2 Nano board, which is the standard controller that ships with each K40 laser. The M2 Nano board is a motion controller that has limited control of cutting in corners and is not integrated with the K40's digital control panel for laser power. Black laser marking spray can be applied to enhance the contrast of engravings done with this setup.

The Nano Control Board, on the other hand, typically refers to an Arduino Nano-based control board, which can also be used for controlling CNC machines and laser engravers. On the other hand, the Nano controller board, which is the standard controller that ships with each K40 laser, is a motion controller that has not been integrated with the K40's digital control panel for laser power. Monport 2.0 GRBL Control Board can replace these Nano boards completely.

Black Laser Marking Spray

GRBL Control Board


The Nano Control Board, in the context of the K40 CO2 laser engraver, typically refers to the M2 Nano board, which is the standard controller that ships with each K40 laser. The M2 Nano board is a motion controller that has limited control of cutting in corners and is not integrated with the K40's digital control panel for laser power. Black laser marking spray can be applied to enhance the contrast of engravings done with this setup.

The Nano Control Board, on the other hand, typically refers to an Arduino Nano-based control board, which can also be used for controlling CNC machines and laser engravers. On the other hand, the Nano controller board, which is the standard controller that ships with each K40 laser, is a motion controller that has not been integrated with the K40's digital control panel for laser power. Monport 2.0 GRBL Control Board can replace these Nano boards completely.

k40 control board


 
Section 2: Monport GRBL 1.0 Control Board vs Monport GRBL 2.0 Control Board - The Ultimate Showdown

Once we've established the differences between the two control boards, we will dive into a detailed comparison of the Monport GRBL 1.0 Control Board and the Monport GRBL 2.0 Control Board. This head-to-head comparison will cover aspects such as ease of installation, compatibility, software support, and overall performance, allowing you to determine which control board best suits your needs.
 

Similar Points

Monport 1.0 Control Board and Monport 2.0 Control Board are compatible with LightBurn software and is known for its ease of use and performance. Both boards can be used for similar purposes.
 

Different Points

GRBL Control Board is specifically designed and optimized for CNC and laser engraving applications. The GRBL Control Board may offer better performance and compatibility with CNC software like Lightburn. Monport GRBL 1.0 control board can connect to Z axis but Monport 2.0 Control Board has no access to connect to Z axis.

 
As a CNC and other laser engraving users, it is recommended to choose the GRBL controller board for K40 lasers, as it offers better compatibility with CNC software like LightBurn and provides better performance compared to the Nano controller board. However, you can choose Monport 2.0 GRBL controller if you are a laser engraving beginner.
 
Monport 2.0 GRBL controller, which is the standard controller for the Monport K40 Laser Engraver. This controller can be used for engraving and cutting various materials like glass, leather, plastic, and wood. However, it can also be replaced by the Monport 1.0 GRBL controller, which is specifically designed for Monport 40W CO2 laser engravers and cutters, as well as other 40W machines.
 

Section 3: Pros of Monport K40 Laser Control Board - Discover the Benefits

  1. The biggest one is being able to use LightBurn and all its features!
  1. Better image engraving: Better control for grayscale images/photos engraving!
  1. Convenient port: You can use an independent port for your roller! (Y2 or Z axis). No need to unplug the Y axis to use it. Includes the splitters/adapters needed for basic install. Axis, CO2 Tube and limit switches. The USB port on the board is now USB-C, cable included. May need to buy a longer one depending on your setup.
  2. Optimize operation: The overall movement is more refined, all axis seems to move more gentle, less noisy.
  3. Easy for LightBurn camera installation: You can install a camera to the board that shows the video feed in LightBurn. You can use the official one or adapt an eBay cheapo camera.
  4. Easy to use: The Monport GRBL control board is designed to be easy to set up and use, making it a good choice for beginners or those who are new to CNC (computer numerical control).
  5. Low cost: The Monport GRBL control board is an affordable option for those who are looking for a budget-friendly CNC control board.
  6. Compatible with a variety of CNC software programs: The Monport GRBL control board is compatible with a wide range of CNC software programs, including popular programs such as LightBurn and Fusion 360.
  7. Capable of controlling up to three axes: The Monport GRBL control board is capable of controlling up to three axes, which allows for a range of motion and flexibility in the CNC machine.
  8. Supports external devices: The Monport GRBL control board includes support for external devices such as cameras and probes, which can be useful for tasks such as laser engraving or 3D printing.
  9. Based on open-source software: The Monport GRBL control board is based on the open-source GRBL software platform, which means that it is customizable and can be modified to fit specific needs.

 
Can the Monport GRBL Control board be used on a CNC machine?

GRBL is an open-source CNC control software that runs on the Arduino platform. It is designed to be used with various machine tools, such as mills, lathes, and 3D printers, and is capable of controlling the movement of the machine's axes and operating its tools. Black laser marking spray can enhance the engraving results when using GRBL-controlled machines for laser engraving.

The structure of the GRBL control board consists of an Arduino microcontroller, a number of input/output (I/O) pins, and a USB interface. The microcontroller is responsible for executing the instructions contained in the CNC program, while the I/O pins are used to interface with the machine's motors and other peripherals. The USB interface allows the control board to be connected to a computer, which is used to send CNC programs and receive status information from the machine.

In general, the GRBL control board is a relatively simple and inexpensive option for controlling a CNC machine. It is widely used by hobbyists and professionals alike due to its versatility and ease of use.

 
Laser with Monport

Stay tuned as we unravel the intricacies of laser control boards and guide you through the process of selecting the ideal control board for your K40 laser engraver. Let's embark on this exciting journey together!

Black Laser Marking Spray

Previous Post Next Post

Leave A Comment

Please note, comments need to be approved before they are published.

Your pre-order item has reached its limit.