65W
65W CO₂ Laser Power
A higher-output glass tube delivers more energy per pass, so you cut deeper and faster with fewer repeat passes.
Reno 65 Pro · Desktop CO₂ Laser Cutter
Cut through wood and acrylic with powerful 65W CO₂ performance. Take on thicker materials and more demanding projects with confidence.
65W
CO₂ laser power
20mm
Acrylic · single pass*
18mm
Plywood · single pass*
65W Cutting Performance
65W isn't just a number on a spec sheet. It's the headroom that lets you cut thicker stock, keep edges clean and take on the jobs smaller desktop lasers struggle with.
65W
A higher-output glass tube delivers more energy per pass, so you cut deeper and faster with fewer repeat passes.
Single pass
20mm
Cut thick clear or colored acrylic in a single pass for signage and displays that feel substantial.*
800mm/s
When the job calls for detail work, high-speed engraving keeps batches moving between cuts.
Maximum thickness Reno 65 Pro is rated to cut in one pass.*
*Maximum single-pass cutting thickness is based on Monport's testing. Actual results depend on material type, color, density, quality and settings. 800mm/s is the maximum engraving speed. Cutting speeds are lower and vary by material and thickness.
See the Cut. Feel the Power.
Take on a wider range of cutting projects with powerful CO₂ performance.
The 65W beam traces the line and leaves a smooth, glossy edge, ready for signs, displays and décor straight off the bed.
Intricate profiles cut fully through sheet plywood, turning raw boards into parts, décor and products in a single job.
Lay acrylic or plywood flat on the honeycomb bed across the 24" × 16" work area.
Magnetic focus assist sets the height fast. 65W delivers the energy for a full-depth cut.
Adjustable air assist clears smoke and debris for a cleaner, more consistent kerf.
Finished parts come free from the sheet, ready to assemble, finish or sell.
From Raw Materials to Finished Products
Thicker, cleaner cuts open up product lines that need real structure: freestanding signs, load-bearing displays and tight-fitting boxes, not just thin cut-outs.
Thick, freestanding signage with clean, glossy edges.
Sturdy plywood stands for retail counters and markets.
Tight finger joints that fit together right off the bed.
Dense lattice patterns cut cleanly in one job.
Cut and engrave in one setup, ready to package and ship.
Built for Consistent Performance
Power only matters if it holds through long jobs. These upgrades keep the last cut as clean as the first.
3L
An integrated reservoir and radiator keep the tube cool through long cutting runs, with no external chiller or extra hoses on your bench.
20 L/min · 30 kPa
Turn airflow down to protect fine engraving detail, or up to blast debris out of the kerf for cleaner cuts.
100mm Z-travel
Snap on the magnetic gauge and set focal height in seconds for repeatable results across materials of different thickness.
1W IR
Add the optional 1W IR module (sold separately) to mark stainless steel, aluminum and other metals beyond CO₂ range.
Real Projects, Real Cutting Results
Wood and acrylic work from Reno creators, the kind of jobs that need real cutting power.
4.9
Based on 85 reviews
Batch production
A full sheet of plywood parts in one run
Cut wood
Sheet to finished profile
“Love the magnetic focus, power and accuracy are great.”
“I'm impressed with the compact size of the laser and its power output.”
“I've had the Monport Reno65 Pro for a couple of months and am generally quite pleased.”
The Full Spec Sheet
Cutting power, a full-size bed and the hardware to run it all day, in one desktop machine.
65W CO₂
Laser power for thick-material cutting
24" × 16"
Rated work area (600 × 400 mm)
800mm/s
Maximum engraving speed
3L
Built-in water cooling, no external chiller
20 L/min
Adjustable air assist · 30 kPa
1W IR
Swap-ready module (optional, sold separately)
































Reno 65 Pro · 65W Desktop CO₂ Laser
Bring more demanding projects to life with Reno 65 Pro.