US Tech-Support: (812)351-0217
Here we will show you the whole process of unboxing
The first one to show you is the Monport 60W (20*28) Manual Focus CO2 Laser Engraver
After receiving your new 60W, you should check if the package is damaged first. If you receive a damaged package, please DONOT sign for it and connect us via support@monportlaser.com
Then follow these steps to play the 60W laser and enter a wonderful laser world.
STEP1:UNBOX THE PACKAGE
Your package is sent via truck and delivered to your doorstep
Use tools to remove nails form wooden boards
Remove the nails fixed on the engraving machine foot
Then you will see the whole 60W engraving machine
Open the cover of the engraving machine, you will see the blue bucket filled with other required accessories
Remove the protective foam from the laser tube
Turn on the laser switch, the machine starts working
STEP2: CONNECT 60W AND A WATER CHILLER
Connect the water outlet of the laser to the water inlet of the water chiller,and connect the water inlet of the laser to the water outlet of the water chiller
Pour distilled or purified water into the chiller
Finally the water chiller is installed
For more unboxing process of other models of engraving machines, please watch the following videos
The Unboxing of Monport 80W CO2 Laser Engraver
The Unboxing of Monport 80W Built-in Chiller CO2 Laser Engraver
The Unboxing of Monport 20W Fiber Laser Engraver
The Unboxing of Monport 50W Fiber Laser Engraver