The world of laser cutting hinges on precision and power. For creators and entrepreneurs, selecting the right laser cutter can be a significant decision. A common question that arises is: How thick can an OMTech Polar 80 watt CO2 laser cut?
This blog delves into the cutting capabilities of the OMTech Polar 80 watt CO2 laser, explores factors influencing cutting depth, and then highlights the advantages of choosing a Monport 80 watt CO2 laser instead.
Monport 80W CO2 Laser Engraver & Cutter (36" x 24") with FDA Approved
CO2 lasers, including the OMTech 80 watt model and Monport 80 watt CO2 laser, utilize focused beams of light generated by carbon dioxide gas to precisely cut and engrave a wide range of materials. The 80 watts of power in this laser translates to its ability to deliver a specific amount of energy onto the material being cut. This concentrated energy melts or vaporizes the material, creating a clean and precise cut edge.
While the wattage of a laser plays a significant role in cutting depth, it's not the sole factor to consider. Here are some key elements that influence how thick an OMTech 80 watt CO2 laser (and any other similarly powered CO2 laser like Monport 80 watt CO2 laser) can cut:
Material Type: Different materials have varying degrees of heat resistance. For example, wood, acrylic, and thin plastics are generally easier to cut through compared to denser materials like metals or thick stone.
Laser Settings: The cutting depth can be adjusted by controlling the laser's power output, cutting speed, and the number of cutting passes. Higher power and slower speeds will generally result in deeper cuts.
Material Thickness: The thickness of the material itself directly impacts the laser's ability to cut all the way through. A thicker material will require more laser power and potentially adjusted settings to achieve a complete cut.
It's important to remember that these are estimates, and the actual achievable cutting depth will vary depending on the factors mentioned above. Here's a general guideline for common materials, applicable to an OMTech 80 watt CO2 laser and Monport 80 watt CO2 laser:
Material | Estimated Cutting Depth |
---|---|
Wood | Up to 1/2 inch (12.7 mm) |
Leather | Up to 1/8 inch (3.17 mm) |
Acrylic | Up to 1/4 inch (6.35 mm) |
Thin Plastics | Up to 1/8 inch (3.17 mm) |
Important Notes:
These are general estimates and the actual achievable cutting depth will vary depending on several factors, including:
Thicker materials or those requiring more precision may necessitate multiple cutting passes with adjusted settings.
It's recommended to consult the user manual or manufacturer specifications for specific cutting recommendations for your chosen laser and materials.
While an OMTech 80 watt CO2 laser offers a decent cutting capability, there are several advantages to choosing a Monport 80 watt CO2 laser instead:
Let's explore the features of the Monport 80W CO2 Laser Engraver and how they elevate your laser cutting experience compared to an OMTech model:
Feature | Monport 80 Watt CO2 Laser | OMTech AF2028-80 |
---|---|---|
Use code BESTMP10 for 10% Discount |
||
Work Area | 20" x 28" (larger work area for bigger projects) | 20" x 28" |
Cutting Ability | Up to 20mm (thicker cuts) | Up to 10mm (thinner cuts) |
Speed | 800mm/s (faster cutting speeds) | 600mm/s (slower cutting speeds) |
Software Compatibility | LightBurn, RDWorks, CorelDRAW, AutoCAD (wider software options) | RDWorks, LightBurn, CorelDRAW, AutoCAD |
Pass Through | Front and Back (increased material handling flexibility) | Front, Back, Left, Right |
Control Panel | DIDA | DIDA |
Guide Rail | Enclosed guide rail (improves cutting precision) | Linear Guides |
Air Assist | Yes | Yes |
Water Chiller | External Water Pump (included) | No built-in chiller (requires separate purchase) |
As you can see, both the Monport 80W CO2 and the OMTech AF2028-80 offer similar core functionalities like 80 watts of power and a 20" x 28" work area. However, the Monport laser boasts several advantages that can significantly enhance your laser cutting experience:
Larger Cutting Capacity: The Monport laser can potentially cut through thicker materials (up to 20mm) compared to the OMTech's 10mm limit. This allows you to tackle a broader range of projects.
Faster Cutting Speeds: With speeds of up to 800mm/s, the Monport laser completes projects quicker, saving you valuable production time.
Enhanced Software Compatibility: Monport offers compatibility with a wider range of design software, including LightBurn, which is a popular choice for laser users.
Improved Material Handling: The Monport laser's front and back pass-through design simplifies working with longer materials that extend beyond the work area.
Increased Precision: The enclosed guide rail system on the Monport laser contributes to sharper and more precise cuts.
Water Chiller Availability: While neither machine has a built-in chiller, Monport includes an external water pump in the base price, reducing additional upfront costs.
Whether you're a seasoned laser user or just starting your cutting journey, a Monport 80 watt CO2 laser offers a powerful and versatile solution that goes beyond what an OMTech model might provide. With its user-friendly features, comprehensive support, and the ability to cut through a wide range of materials, a Monport 80 watt CO2 laser empowers you to bring your creative visions to life with confidence.
Contact Monport Laser Today!
Ready to explore the exciting world of laser cutting and discover the advantages of choosing Monport? Visit Monport Laser today to learn more about our 80 watt CO2 laser and how it can elevate your laser cutting experience.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
Leave a comment