Skip to content
Best Fiber Laser Engravers & Cutters in 2023

Best Fiber Laser Engravers & Cutters in 2023


A fiber laser engraving machine, also known as a laser marking machine, costs at least $10,000. However, you can expect higher accuracy, durability, and versatility than with traditional laser engraving machines. Finding the right fiber laser engraving machine and choosing the right fiber laser marking machine can be difficult because several characteristics and factors must be considered.

We have listed some of the best fiber laser marking machines for you to consider purchasing in 2023 in this guide. If you're unfamiliar with this technology, we'll go over what fiber laser carving is, how it differs from other technologies, why it's better, and what you can do with it.


What is a Fiber Laser?

A fiber laser is a type of laser that amplifies light by using a flexible optical fiber as the gain medium. The active laser medium is an optical fiber doped with rare-earth elements such as erbium, ytterbium, or neodymium, which is why it is called a "fiber" laser. Pumping a high-power light source, typically a diode laser, through the fiber produces light. The light is then amplified by stimulated emission as it travels through the fiber. The fiber laser's output can be highly collimated and has a high beam quality, making it suitable for a wide range of applications such as cutting and welding, marking, engraving, and materials processing. Fiber lasers have several advantages over other types of lasers, including high efficiency, low maintenance, and ease of use.


What are Raycus laser?

Raycus is a Chinese company that manufactures fiber lasers. Raycus fiber lasers are a type of solid-state laser in which the gain medium is a doped optical fiber. The laser light is produced by excitating the rare-earth ions in the fiber with a high-power diode laser. The light is then amplified by stimulated emission as it travels through the fiber. The Raycus laser produces a highly collimated and high-quality beam, making it suitable for a wide range of applications such as cutting, welding, marking, and engraving.


Best Fiber Laser in 2023

We chose these fiber laser engraving machines after carefully examining factors like size, material performance, laser power, service, assembly, working area, laser safety, and software application. They list the top fiber laser engraving machines below:


Monport 20W Fiber Laser Engraver


Fiber source lifetime:
Laser wavelength:1064 nm
Engraving precision: ±0.1 µm
Work area: 6'' X 6''
Maximum marking speed:7000 mm/s
Maximum engraving depth: 0.04 in.
Software: EZCad, LightBurn
Upgrades: 80mm rotary axis
Support: a warranty for two years.


The Monport 20W fiber laser is a good choice if you're looking for a compact and affordable laser engraver for small to medium-sized projects.
One of the key features of the Monport 20W fiber laser is its ease of use. The machine is designed with a simple interface and user-friendly software, making it accessible to users with limited experience in laser engraving. It also has a compact design and lightweight construction, making it easy to transport and set up in your workshop or production line.
In terms of performance, the Monport 20W fiber laser is capable of producing precise and accurate results. However, the lower laser power compared to other fiber laser engravers may limit its ability to handle more challenging engraving projects or materials.


Monport 60W Integrated MOPA Fiber Laser Engraver

Laser Type: JPT MOPA Fiber
Color Engraving: YES
Compatible Materials:All kinds of metal including Stainless Steel, Aluminum, Gold, Silver, Alloy ,Ceramic,Marble, Leather,Plastics etc.
Expected Service Life (MTTF): 100,000 hr.
Working Area: 7.9" x 7.9"
Machine Dimensions: 22" x 13.4" x 28.3"
Wavelength: 1064nm
Marking Speed: 0- 10000mm/s
Accuracy: 0.01mm
Graphic Format Supported: BMP, GIF, JPG, JPEG, DXF, DST, Al.etc
System Supported: Window7/8/10/11 , MAC


This powerful machine combines innovative design, precision, and vibrant color-marking capabilities. The Monport GI series is available in 20W, 30W, and 60W models, offering electric focus lifting and full compatibility with LightBurn software. With adjustable pulse frequency and width, it can achieve vibrant color marking on stainless steel and high contrast engraving on anodized aluminum. The integrated design ensures a lighter weight, smaller size, and improved user experience. Featuring electric lifting focus and industry-leading heat dissipation technology, the Monport GI60 sets a new standard in fiber laser engraving.


Cloudray JPT 60W MOPA Fiber Laser


Laser source: MOPA
Fiber source lifetime: 100,000 hours
Laser wavelength:1064 nm
Engraving precision:  ±0.1 µm
Work area:11.8" × 11.8"
Maximum marking speed: 5000 mm/s
Maximum engraving depth: ≤1mm
Software: EZCad, LightBurn
Support: a warranty for two years.
Cloudray JPT M7 is a MOPA (Master Oscillator Power Amplifier) fiber laser that's designed for high-performance laser engraving and cutting. This machine is equipped with a high-power laser that can reach peak power levels up to 400W, making it suitable for a wide range of applications. The MOPA architecture of the laser allows for more flexibility in terms of pulse duration and repetition frequency, making it well-suited for laser marking and laser engraving on various materials.


Boss FM-Desktop (FMD)


Fiber source lifetime:100,000 hours

Laser wavelength: 1064nm

Engraving precision: 0.002”

Work area: 4.33" x 4.33"

Maximum marking speed: 11,760

Software: RDWork ,LaserWorks 

Support: a warranty for two years.


The FMD is equipped with a high-quality fiber laser that delivers a beam with high brightness and quality, enabling it to produce sharp and accurate markings. Other features of the system may include a user-friendly interface, easy-to-use software, and a compact design that makes it suitable for use in a variety of environments.


FSL Muse Pandora


Fiber source lifetime: 25,000
Laser wavelength: 1064nm
Work area: 11.3" x 11.3"
Software: Retina Engrave v3.0
Upgrades: a rotary axis, expanded Z-travel, fume extractors, and special focus lenses.
Support: a warranty of one year
The Muse Pandora is a high-power fiber laser that is designed for use in a wide range of applications, including material processing, scientific research, and industrial manufacturing.



Monport 50W Fiber Laser Engraver


Fiber source lifetime:
Laser wavelength:1064 nm
Engraving precision: ±0.1 µm
Work area: 12'' X 12'' 
Maximum marking speed:7000 mm/s
Maximum engraving depth: 0.04 in.
Software: EZCad, LightBurn
Upgrades: 80mm rotary axis
Support: a warranty for two years.
It would be best to consult with the manufacturer or a knowledgeable technical expert to determine if this laser is suitable for your needs and to get information on its performance and specifications. Monport has very good customer service and notifies you at every stage of your purchase.
Monport 50W Fiber Laser can engrave acrylic, hard-plastic, brick, granite, marble, tile, aluminum, gold, silver, stainless steel, brass, titanium, and tungsten.
By rotating the focus-height wheel, you can quickly focus the galvanometer laser on various materials like gold, silver, brass, stainless steel, etc . Plus, the vertical supporting tower is equipped with a ruler for convenient focus height measurements.



Consider what you will be using the laser for, the amount of power you need, the wavelength, beam quality, maintenance, cost, manufacturer reputation, and customer support. Choose a fiber laser that meets your specific needs and budget while ensuring it is from a reputable manufacturer with good customer support.





Previous article Maximize Creativity: Custom Wood Engraving with Your 100W CO2 Laser Cutter


John - January 17, 2024

If you’re exploring laser options, consider Monport laser cutters. They are known for their reliability, and their support team could provide assistance based on your specific needs. MPJohn10 for code.

RPM - July 23, 2023

You title says "Best Fiber Laser Engravers & Cutters in 2023”.
The information that was included in the article was good…
…but I’m pretty sure it was Completely focused around engraving.
I probably just missed reading the areas where cutting was mentioned directly.
..but for the slow witted reader that I am… could you possibly go into cutting things such as different kinds of metals as well as the thickness of each metal it can cut through?

Thank you for your time,


Leave a comment

* Required fields

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare