Skip to content
6% OFF code "MONPORT" on all laser engravers
6% OFF code "MONPORT" on all laser engravers

Monport Fireproof 60W (16" x 24") Manual Focus CO2 Laser Engraver & Cutter

Original price $2,499.99 - Original price $2,499.99
Original price
$2,499.99
$2,499.99 - $2,499.99
Current price $2,499.99
Dimension & Specifications

Working Dimension: 16" x 24" ( 40 cm x 60 cm )

Pass-through Dimension:1.5'' x 28''(4cm x 73 cm )

Machine Dimension: 44.1'' x 29.5'' x 25'' ( 112cm x 75cm x 64cm)

Max Engraving Speed: 600mm/s

Max Cutting Speed: 400mm/s

Max Engraving Depth: 10mm

Min Engraving Depth: 0.01mm

Focal Lens Diameter: 18mm

Mirror Diameter: 25mm

Package Dimension: 48.8" x 33" x 32.6" ( 124cm x 84 cm x 83 cm )

9” Standard Z-depth and 10” Max Z-depth

Net Weight: 209 lbs ( 95 kg )

Package Weight: 253.5 lbs ( 115 kg )

Monport 60W Benefits

Fireproof Viewing Window

This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials.

Enclosed Aeronautical Aluminum Rail

Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units.

Ruida Digital Controller

Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can  control the laser head, start or stop projects, adjust laser power and speed settings and so on.

60W CO2 Engraver Features

High Speed and Resolution 

The Engraving Speed is up to 800 mm/s;
The Cutting Speed is up to 400 mm/s;
The Resolution is up to 4500 dpi;
2.0" Focal distance provides high resolution and etching of tiny fonts 

Built-in Air Assist

A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise.

3-ways to Connect with PC End

Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection.

Red Dot Guidance

The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance.

Automatic Safety Sensor

The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the “Enter” button to continue operation.

60W CO2 Engraver Specification

Software

Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit

MacOS (Version 10.11 and higher) ONLY with LightBurn software

Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD

Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others

Laser System

Custom CO2 glass laser tube capable of continuous operation at 10,640 nm;

Rated at over 60 watt;

Easy-to-adjust Optical path;

18mm Focal lens diameter & 2" Focal distance;

25mm Mirror diameter;

Recommended engraving speed: 100 - 500mm/s

Recommended cutting speed: 1 - 30mm/s (actual speed depends on the thickness of the material)

Lighting

The light belt under the lid gives point illumination for precise

Mechanics

Linear System— Custom extruded aluminum linear rails

Motion— Equipped with stepper X, Y axis, plus mechanical limit switches

Cooling— easy-to-setup water pump and hoses

Air Assist— Internal air assist with no external compress or required

Ventilation— On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors

Standard 110V, AC power connection

4-pinport connection for rotary axis devices

Temperature

Recommended Operating Temperature: 60 -104 °F (16 °C-40 °C)

Attention: the CO2 water temperature must be maintained at 60-70 °F (16-21°C)

Laser Tube Lifetime

60W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance

Attention: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:

Low Power 10–40% = 1,700–2,000 Hours
Moderate Power 40–70% = 1,300–1,500 Hours
High Power 70–100% = 800–1,000 Hours

Material Capability

Can safely engrave or cut any laser-compatible material

Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber        

 Contact us with questions on specific materials not listed. If necessary, we can test it for you

Package Contents

Laser Engraver Machine *1

Water Pump *1

Ethernet to Ethernet Cable *1

USB Type-A to Type-A Cable *1

Venting Exhaust Duct (4 ft. max. length) *1

Water Hoses *2

USB Drive with Software (RDworks) *1

Hex Wrenches *10

Double-sided Tape *1

Power Cord *2

Hose Clamp *1

Accessory Bag *1

Keys *2

Silicone Sealant *1

Instruction Manual *1

Warranty & Certifications

1 year warranty on all 60W laser machines and parts

6 month warranty on 60W laser tubes

FDA Approval & CE Certified

About More

Download the Software: RDworks

Download the Manual: 60W CO2 User Manual 

Download the Settings: CO2 Parameter Settings

Compatible Accessories: Rotary AxisWater Chiller

We sponsor CDR files: https://kokorosastudio.com

Why Choose Monport

After Purchase

monport 60w after purchase1
monport 60w after purchase 2
monport 60w after purchase 3

Made by Monport 60W

More Readings

  • Monport lasers with LightBurn Software
    November 11, 2022

    Monport Lasers with LightBurn Software

    Ever dreamt of adding a laser engraver to your wood shop or craft space? A Monport laser is exactly what you are looking for; with several different sizes, customizable for your needs! Our lasers use LightBurn software for a user-friendly...

    Read now
  • Laser Engraver Easy to Use
    February 15, 2022

    Is The Laser Engraver Easy To Use?

    Traditional carpentry, wood-cutting and leather decorating are crafts that require long years of practical training to achieve mastery. However, with laser engraving anyone can create items at a level of quality high. It is easy to operate compared with traditional...

    Read now
  • Comparison of Monport Co2 laser engravers
    February 8, 2022

    Comparison of Monport Co2 laser engravers

    Introduction              Laser engraving is a great technology that can create many applications, from excellent business cards and modern school kits to trinkets and customized products sold on Etsy. With the creation of laser engraver...

    Read now

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare